Spruce wood merchant shop Sylva 3x2,4m Habrita 7.2m2

Sylva spruce wood merchant stall 3 x 2.4 m Habrita 7.2m2 View larger

New Reduced price!

2 294,10 € tax incl.

-10%

2 549,00 € tax incl.

Visa, CB, MasterCard, 3-D S, Maestro, Amex, Transfert, Paypal, Stripe, Viva, Stancer, Delupay, Klarma, Revolut, 2X 4X 6X
Visa, CB, MasterCard, 3-D S, Maestro, Amex, Transfert, Paypal, Stripe, Viva, Stancer, Delupay, Klarma, Revolut, 2X 4X 6X

By buying this product you can collect up to 229 loyalty points. Your cart will total 229 points that can be converted into a voucher of 45,80 €.


Merchant shop in Sylva Spruce Wood 3x2.4m Habrita.
The Sylva merchant shop is specially designed for fairs, Christmas Markets or commercial presentations, this small chalet of 7.2m2 is equipped with two large shutters that allow the shelter to be closed.



More details

Online only

FO-SY3024.01L

New product

More info

Merchant shop in Sylva Spruce Wood 3x2.4m Habrita.
The Sylva merchant shop is specially designed for fairs, Christmas Markets or commercial presentations, this small chalet of 7.2m2 is equipped with two large shutters that allow the shelter to be closed.

This Christmas chalet shop is made in Europe and has two large shutters that allow the shelter to be closed.

- Untreated spruce
- With floor
- Pre-hung panels
- With door and latch
- Corrugated sheet roofing
- Disassembly possible

Sylva merchant shop in untreated solid spruce.

Hardware: Floor: two factory-pre-assembled panels 1,200 x 2,400 mm and one 600 x 2,400 mm panel made of 12 mm thick OSB sheets, fixed on a double cross network of joists, 70 x 40 mm section. Separate packaging of floor panels.

Assembly panels with two simple lever closures to achieve a quick, simple and clamping assembly.
This solution saves a lot of installation time.
The double cross joist gives: more solidity to the floor allows the use of the floor panel as a pallet for the entire shelter avoids the installation of the shelter on a concrete slab.
Pre-assembled panel walls planed planks with 20 mm thick fir tongue and groove fixed on a 40 x 40 mm frame.
The panels will be assembled with metric screws with wing nut and washers provided in the ironwork bag (assembly between the panels, between the panels and the floor and between the panels and the roof joists).

The door Dimensions 0.80 x 1.75 m delivered with latch for padlock and ironwork black epoxy paint pre-assembled in the factory is located on The back wall.
Two openings on the façade of 2 x 1.115 x 0.95 m with shutters closing inside the shelter.
The hinged shutters at the top open and lock with metal rods in a horizontal position.
The countertop on the front with dimensions 223 x 40.5 cm.

Frame Two gables in pre-assembled panels of planed planks with 20 mm thick tongue and groove fixed on a 40 x 40 mm section frame and solid wood beams.

Blanket dark red bitumen corrugated sheets with three ridges of the same colour as the plates. Plates are fastened with dark red moulded head notched nails for watertightness.

Decorations of the front and rear façade in solid fir, section 130 x 20 mm, planks cover the joints at each joint of the cladding panels. Fixing decorations with metric screws and wing nuts.

Disassembly:
The majority of the parts are assembled with metric screws and wing nuts.
This solution allows easy assembly without tools and repeated dismantling of the shelter without damage to the wooden parts.
The only parts fixed by nailing are the corrugated roofing sheets and the cover boards joined between the panels.

Optional : A replacement kit for these parts is offered in order to renew them each time they are disassembled.

Benefits:
The access door is located at the rear of the chalet.
If the shelter is installed directly on the ground, the shutters are removable so as not to obstruct customers' access.
If the shelter is installed on a raised base, the hinged shutters at the top open and lock with metal rods in a horizontal position.

Technical characteristics:
Material: Untreated solid spruce
Floor dimensions: 3.00 x 2.40 m
Floor area: 7.20 m²
Useful interior dimensions: 2.88 x 2.28 m
Usable area: 6.57 m²
Overall dimensions: 3.15 x 2.74 m
Wall height: 2,075 mm
Ridge height: 2400 mm
Floor: With
Care instructions: Treat the wood and apply a stain after assembly (interior and exterior)
Certifications: PEFC
Warranty: 2 years
Packaging: 2 pallets
Dimensions: Pallet 1, 270 x 25 x 14 cm – weight: 50 kg
Pallet 2, 240 x 120 x 97 cm – weight: 470 kg

Several choices and versions available on request.
- Option: To be fixed to the ground and to protect the starting elements with the K-SA underbody kit.

Mark: Habrita
Habrita, leader in wood or metal equipment for your garden.
A brand of the Foresta group, Habrita is definitely the reference for garden design, wooden and metal garden sheds, garden greenhouses and animal shelters.
Habrita.
Specialist in garden design, wooden and metal garden sheds, garden greenhouses and animal shelters, Habrita offers high quality products.

Habrita : Shelters, chests, greenhouses, carports, pergolas.
Since 1997, the company has been designing, manufacturing and marketing wooden constructions for the garden.
With its experience, it expanded its range in 2012 to offer a complete response around outdoor design.
It offers a wide choice of products delivered to your home under the brand HABRITA.
Garden sheds made of wood, aluminium, resin or canvas, as well as pergolas and carports made of wood or aluminium, but also greenhouses, garden furniture and animal shelters.


Specialist in high quality Design and Brands for individuals and professionals. We present trendy creations and objects from the biggest brands and designers. Expert in the sale of equipment, furniture and contemporary objects for the home, garden, swimming pool, heating and well-being.

Data sheet

Height230 cm
Lenght3.00 cm
Depth2.40 cm
Weight450 KG
ColourEpicea wood
BrandHabrita
ModelSylva

30 other products in the same category: